If you click a link on this page and make a purchase we will earn a small commission at no extra cost to you.
Table of Contents
Amazon.com 
The DJI F450 is actually designed as a frame. The owners can add or remove certain technical elements which make this quad extremely versatile. The F450 can be used for both fun and creating professional aerial views. Remember that the F450 is an ARF (Almost Ready to Fly) quadcopter and it requires medium to advanced building. Once you manage to put it together, you will see that the DJI F450 can do many cool staff and that it is pretty fun to own. The DJI F450 can be used for a wide variety of aeromodeling activities. It can also roll, hove and cruise. The F450 is made piece-by-piece and that is the best part about this quadcopter. The frame is sturdy and shock resistant. However, the damaged parts can be replaced in the case of more violent crash. You can also buy this quadcopter with other elements, such as a flight controller
Product Specs
- Diagonal Wheelbase: 450mm
- DJI 2212 920KV Brushless motor
- HP Simonk 30A Speed Controller
- Frame Weight: 282g
- Takeoff Weight: 800g ~ 1600g
- Landing gear: 17.5g each arm
- 1 x APM2.8 Flight controller
- Screws for landing gear: 6.86g (all screws)
What’s in The Box?
The DJI F450 can be delivered in different ways. However, if you decide to purchase the kit, the package should contain the following: centre plates, APM2.8 flight controller with case, four arms, battery charger, hardware for assembly, 11.1V 2200MAH 30C Li-Po battery, velcro and strap for battery, 3 bags of screws, and wires for the power distribution board.
DJI F450 Design
The DJI F450 is very resistant to crashes because its frame id built from ultra-strong materials. The main frame plates are made from PCB material. This material is designed to implement high-strengths. The arms are made from PA66+30GF material. Normally the kit comes with arms colored differently to offer an improved visual orientation during flight. There are 2 black and 2 white arms or 2 red and 2 white arms.
The plates and arms are designed to protect the battery and the ESCs. There is also enough space between bottom and top plates to add elements that need to be protected.
DJI F450 Battery
The manufacturer recommends a 3S or a 4S Li-Po battery
Flight time depends on the battery you install on the quadcopter. It also depends on how heavy the quad is after you install the camera.
The owner reported a flight time of 18 minutes. The quad was equipped with E300 Motors, ESC and 3S 5000mAh Li-Po battery. It is important to note that the quad wasn’t pushed to the limits.
Another owner reported a flight time of 33 minutes. The quad was without any camera and it mostly hovered. This means that flight time of this quad completely depends on your own settings.
Camera
The DJI F450 doesn’t come with a built-in or included camera. However, it allows for a lot of space for the owner to add one. If you want amazing pictures and scenic views it is recommended to use this quadcopter with Gimbal and a GoPro
This quad also supports an FPV video transmitter. It allows for real-time streaming to a tablet or Smartphone. Again, since this is just a kit, the transmitter is not included.
Controller
If you want to have a complete experience with the DJI F450 we recommend the NAZAM V2 GPS controller. This flight controller manages to provide better flight performance and it is also preferred because of its incredible features, such as: barometer, inner damping, 3-axis gyroscope and 3-axis accelerometer. Also, the all-in-one design makes the installation pretty easy. Remember that it is very important to make the preparations for its installation in time because this item will be introduced in between the two plates.
Because of all these, it knows the altitude. This is why it can be used for automatic controls, such as automatic return to start point. This is possible only if your controller supports failsafe function through port-U and the NAZA controller has a built-in failsafe function. The Return to Home failsafe will be activated when the communication is interrupted with the GPS module in use.
Flight Performance
It may be difficult to get used to the F450’s flying mode if you don’t have any experience in piloting quads at all. It is very important to get used to the idea of flying a quadcopter. This is the reason why many users suggest trying with a cheaper quad at first.
The DJI F450 is very stable in flight and once you learn its moves it is pretty simple to control. This quad is capable of performing a series of stunts, such as rolling and hovering.
The users report that this quadcopter can achieve the following flight performance – it can support up to 130 kph (80 mph), it has a maximum flight altitude of 466 meters (1528 Ft) and maximum ascent of 390 meters (1277 Ft).
Also, it hands off the controller. This is a very interesting failsafe for newbies. This means that the quadcopter is centred automatically by the GPS module when it doesn’t receive commands. The quad simply hovers waiting for further commands.
Unique Features
The DJI F450 frame offers a large degree of versatility and that’s why it is considered to be unique. The Arms are designed to make the quad lighter and easier to maintain in the air. Also the plates are durable and shock resistant.
Furthermore, you can add a series of elements such as FPV transmitter, a camera of your choice or a landing skids. Other quads don’t allow small parts to be replaced. However, with the F450, each part can be replaced at a very cheap price. These all features make the DJI F450 extremely easy to work with.
Price
The owner can add different elements to the DJI F450 because it is built as a kit. In this way you can make it as affordable as possible. You will spend about $50 if you only want the kit. However, you will also need a battery, a charger, a radio set (receiver and transmitter) and a controller if you want your F450 to fly. All these elements will add to the price, making your quad get somewhere around $300-$500.
There are also more costly accessories available on the market today. These will include landing skids (the original feet are too small), GPS system on the controller, etc.
Conclusion
The DJI F450 is designed for hobbyists and people who are looking for the versatility from their quads. This quadcopter is lightweight and flies really well. This allows you to focus on other things such as aerial video instead of worrying about your frame falling apart. The F450 is a pretty advanced quad and it can deploy professional results when it comes to aerial imagery. So if you like DIY projects and are a drone enthusiast, this frame will definitely give you the best starting point to an incredible experience. However, you should know that it also requires some technical knowledge and a bit of work.
Since this is an older drone, we would recommend to check out newer models that are much more powerful, both in terms of flight performance and camera capabilities.
Some of the drones you should look into:
